iot:tasmota-templates - pup.casa Docs

Trace: • maffs-powerbook • eu-fsn-hv3 • tasmota-templates • websrv • playground • a64-p4-8-0 • traybake • machines • queer.party-cessation • dokuwiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

This page serves to list the Tasmota device templates for various non-supported units (mainly development boards), or units whose official template is lacking

Heltek Wifi-Kit-32

IoTBear ESP8266 Breakout

M5Stack Basic

M5Stack Fire

| GPIO# | Mapping | Mapped? |
| 1 | UART Transmit | Yes |
| 3 | UART Receive | Yes |
| 15 | WS2812 | Yes, Channel 1 |
| 26 | WS2812 | Yes, Channel 2 |
| 36 | ADC Range | Yes, Channel 1 |
| 39 | Button | Yes, Channel 1 |

Olimex ESP32-EVB

| GPIO# | Mapping | Mapped? |
| 0 | Clock | No |
| 1 | UART Transmit | Yes (hard) |
| 2 | HS2 Data line 0 | No |
| 3 | UART Receive | Yes (hard) |
| 4 | U1 Transmit | No |
| 5 | CANBUS Transmit | No |
| 6 | SD Clock | No |
| 7 | SD Data line 0 | No |
| 8 | SD Data line 1 | No |
| 9 | SD Data line 2 | No |
| 10 | SD Data line 3 | No |
| 11 | SD Command/Data | No |
| 12 | IR Transmit | Yes |
| 13 | I2C Data | No (IR FW) |
| 14 | HS2 Clock | No |
| 15 | HS2 Command/Data | No |
| 16 | I2C Clock | No (IR FW) |
| 17 | SPI Chip Select | No |
| 18 | Ethernet MDIO | No |
| 19 | Ethernet Transmit 0 | No |
| 21 | Ethernet Transmit Enable | No |
| 22 | Ethernet Transmit 1 | No |
| 23 | Ethernet MDC | No |
| 25 | Ethernet Receive line 0 | No |
| 26 | Ethernet Receive line 1 | No |
| 27 | Ethernet Receive CRS DV | No |
| 32 | Relay 1 | Yes |
| 33 | Relay 2 | Yes |
| 34 | Button 1 | Yes |
| 35 | CANBUS Receive | No |
| 36 | U1 Receive | No |
| 39 | IR Receive | Yes |

Not implemented:

Ethernet, SD, CANBUS, HS2, U1 (Charge controller)

<code ->
{"NAME":"Olimex ESP32-EVB","GPIO":[1,1,1,1,1,1,1,1,1056,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,224,225,32,1,1,1,1,1088],"FLAG":0,"BASE":1}
</code>

Search

Navigation

Print/export

Tools